karaoke entry level microphones

the 'dm 5.0 s' is a microphone for voice characterized by exceptional linear frequency response and cardioid polar pattern. following are the main features are listed below:

- sensitivity: -52 db
- frequency response: 50 hz - 16,000 hz
- impedance: 600 ohms
- on/off switch
- connector: xlr 3 pin
- weight: 300 grams

note: the manufacturer

this kit to hand professional (or amateur) is suitable for various applications (piano bar, karaoke, rehearsal, etc.) and is composed of:

> 'shure sv100'
- multipurpose microphone with wide frequency response and high output level, with unidirectional-cardioid capsule that helps reduce unwanted feedback
- frequency response: 50-15,000 hz
- impedance: 600 ohms
- sensitivity: -52 dbv/pa at 1kHz
-

this vocal dynamic microphone with on/off switch is perfect for home use and amateur - designed for voice, karaoke, song, spoken word, etc., is made with a high strength plastic and metallic black grille. following are the main features (referred to a single unit):

- type: dynamic
- directivity: unidirectional
- frequency response: 80 hz - 12 khz
-

this kit includes 1 for vocal dynamic microphone, 1 xlr cable from 6 meters and 1 boom mic stand. equipped with a purse to contain it/carry, is a practical solution for both itinerant and sedentary 'users'. following are the main features:

- unidirectional dynamic microphone with metal housing and pencil case
- microphone frequency response: 50 Hz - 16

the proel dm580lc is a dynamic microphone with cardioid frequency response has been adapted specifically for vocal applications - the cardioid polar pattern isolates the main sound source and avoid the feedback - the steel ball grille with integrated filter to reduce wind noise and the sturdy metal frame with on/off switch make it suitable for a variety of uses.

the 'dm220' is a microphone for voice characterized by exceptional transparency on medium-low frequencies, a linear frequency response and built-in switch. following are the main features are listed below:

- polar pattern: cardioid
- transducer: dynamic
- frequency response: 50 hz-15 khz
- sensitivity: -53 db +/-3 db
- nominal impedance: 600 ohms
- max input: 135 db

the ' dm 5.0 has a microphone for voice characterized by exceptional linear frequency response and polar pattern cardioid- this kit consists of three dynamic microphones (dm 5.0 s), three pole clamps and a plastic case with padding to contain/convey properly the whole thing. following are the main features are listed below:

- sensitivity: - 52 db
- frequency

the 'dm 5.0 s' is a microphone for voice characterized by exceptional linear frequency response and cardioid polar pattern. following are the main features are listed below:

- sensitivity: -52 db
- frequency response: 50 hz - 16,000 hz
- impedance: 600 ohms
- on/off switch
- connector: xlr 3 pin
- weight: 300 grams

note: the manufacturer

the "pse3" is the ideal microphone kit version, designed for those who move their first steps into the world of music - the kit includes the following articles: rms180 (black MIC), dm800 (dynamic microphone), bulk250lu6 (from 6 m microphone cable with xlr connectors proel aluminium) and apm20 (rubber microphone support) - the kit is supplied with a handy nylon transport

few things are more essential to recording or live performance than dynamic microphones. ask any sound engineer and they will tell you to keep as many as possible on hand. BEHRINGER has bundled a set of 3 great-sounding XM1800S dynamic microphones into one impact-resistant case, with stand adapters and mic clips so you’ll be ready to capture your sound in

micpkg 100 is intended for vocalist, complete with all accessories required: dynamic microphone with metal body, 6m xlr cable, giraffe mic stand. complete with carry bag, it's a convenient solution for musicians on the go or services

the boundle contains:
- unidirectional dynamic microphone with metal body and on-off switch
- mic stand with telescoping boom with tripod base.

what you want from a microphone for voice? clear sound, powerful, but nuanced, which passes through any mix without being overly noisy. This is precisely the purpose for which it was built the ultravoice - cardioid characteristic notes with the utmost sensitivity the sound before, but bearable the sound from other directions, providing absolute protection from feedback - the pop

directional dynamic microphone designed for classic applications. following are the main features are listed below:

- structure and metal alloy body
- the protective grill steel capsule
- frequency response: 42-16.8 khz
- impedance: 600 ohm ± 15% @ 1 khz
- sensitivity: -55 ± 1db @ 1 khz-shielded connection cable + carry case/pouch supplied

note: the manufacturer

the sv100 is a multi-purpose microphone with a wide frequency response and high output level, optimal for a variety of uses as spoken, karaoke, tools or multimedia applications. please note that features unidirectional cardioid capsule that helps reduce feedback. following are the main features are listed below:

- frequency response: 50-15,000 hz
- impedance: 600 ohms
- sensitivity: -52

the 'dm226' is a microphone for voice characterized by exceptional transparency on medium-low frequencies, a linear frequency response and cardioid polar pattern. following are the main features are listed below:

- polar pattern: cardioid
- transducer: dynamic
- frequency response: 50 hz-15 khz
- sensitivity: -53 db +/-3 db
- nominal impedance: 600 ohms
- max input: 135