turntable cartridges
AUDIO-TECHNICA AT VM 95 C
- conical stylus (glued round stem)
- aluminum cantilever
- output voltage 4.0 mv (1 khz, 5 cm / sec)
- Reading weight between 1.8 and 2.2 grams (2 grams recommended)
- compliance with static regime 17 x 10 - 6 cm / dyne
- dynamic yielding 6.5 x 10 - 6 cm / dyne (100 hz)
- load impedance
- aluminum cantilever
- output voltage 4.0 mv (1 khz, 5 cm / sec)
- Reading weight between 1.8 and 2.2 grams (2 grams recommended)
- compliance with static regime 17 x 10 - 6 cm / dyne
- dynamic yielding 6.5 x 10 - 6 cm / dyne (100 hz)
- load impedance
Availablity: Soon Available
- shipping € 5.90
- available in 30 days
- Product ID: 164918
- Article ID: 10637
€ 49,00
€ 33,90
- Italian Warranty
- Best Price Guaranteed
- Did you find a lower price? Contact Us!
- Contact Us
- Assistance Centers
- conical stylus (glued round stem)
- aluminum cantilever
- output voltage 4.0 mv (1 khz, 5 cm / sec)
- Reading weight between 1.8 and 2.2 grams (2 grams recommended)
- compliance with static regime 17 x 10 - 6 cm / dyne
- dynamic yielding 6.5 x 10 - 6 cm / dyne (100 hz)
- load impedance 47 kohms
- recommended load capacity 100-200 pf
- frequency response 20 hz - 20 khz
- 18 db channel separation (1 khz)
- output channel balancing 2.5 db (1 khz)
- body with holes for installation on the arm or headshell without the use of nuts
- compatible with all my vm95 series models
- replacement for at91, at91r and cn5625al
- dimensions (mm) 189 x 172 x 283
- weight (gr): 6.1
N.B. - The manufacturer reserves the right to change the characteristics, in line with technological developments and without notice, in order to improve it qualitatively and aesthetically
- aluminum cantilever
- output voltage 4.0 mv (1 khz, 5 cm / sec)
- Reading weight between 1.8 and 2.2 grams (2 grams recommended)
- compliance with static regime 17 x 10 - 6 cm / dyne
- dynamic yielding 6.5 x 10 - 6 cm / dyne (100 hz)
- load impedance 47 kohms
- recommended load capacity 100-200 pf
- frequency response 20 hz - 20 khz
- 18 db channel separation (1 khz)
- output channel balancing 2.5 db (1 khz)
- body with holes for installation on the arm or headshell without the use of nuts
- compatible with all my vm95 series models
- replacement for at91, at91r and cn5625al
- dimensions (mm) 189 x 172 x 283
- weight (gr): 6.1
N.B. - The manufacturer reserves the right to change the characteristics, in line with technological developments and without notice, in order to improve it qualitatively and aesthetically