The FLUID AUDIO FX50 V2 is an active 2-way coaxial studio monitor, sold as a single unit, with a 5 inch woofer and a 1 inch tweeter mounted on the same acoustic axis. You can use it in home studios, editing rooms, desktop setups and multichannel systems, where space is tight but the stereo image has to stay reliable. It delivers 90 W in Class D.
Coaxial point-source design. The tweeter sits in front of the woofer on a fixed mount, so the two drivers behave as a single acoustic source. This gives a stable stereo image with depth and focus, and a consistent off-axis response when you move away from the center of the listening position. Placing the tweeter in front of the woofer reduces the interaction between the moving cone and the tweeter output.
Amplification and DSP crossover. The Class D amplification is bi-amplified: 50 W for the woofer and 40 W for the tweeter. The DSP handles the crossover and system response, so the two drivers blend more evenly around the crossover point. Compared with the first version, the V2 DSP tuning has been updated to make the response more linear and consistent for modern production.
Room placement. The EQ switches on the rear panel, controlled by the DSP, compensate for placement close to walls or in rooms with imperfect acoustics. The front slot port supports bass efficiency and gives you more freedom to place the monitor near walls and desks. The illuminated front indicator also serves as a visual reference for aligning the monitor with ear height. Thanks to the coaxial geometry, you can use it vertically or on its side with consistent response.
Multichannel and immersive systems. A compact cabinet, coaxial dispersion, lightweight Class D amplification and M6 mounting points on the back make it suitable for multichannel and immersive systems for side, rear and height channels, including Dolby Atmos. For larger rooms or higher levels, the FX80v2 extends the same coaxial concept with an 8 inch woofer. To extend the low end, you can pair the FX50 V2 with the FC10S.
| Type | 2-way coaxial studio monitor with Class D amplifier |
|---|---|
| Woofer | 5 inch, curved composite cone with high-temperature voice coil and damped rubber surround |
| Tweeter | 1 inch, natural silk dome |
| Frequency response | 49 Hz – 22 kHz |
| Crossover frequency | 2.95 kHz |
| Amplifier power | 50 W woofer, 40 W tweeter (90 W total) |
| Signal-to-noise ratio | >90 dB, typical A-weighted |
| Max SPL at 1 m | 107 dB, free field |
| Inputs | 1 balanced XLR, 1 balanced TRS, 1 unbalanced RCA |
| Input impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Input sensitivity | 85 mV of pink noise produces 89 dBA SPL at 1 m with volume at maximum |
| Polarity | A positive signal on the + input produces an outward movement of the woofer cone |
| Protections | RF interference protection, output current limiting, overtemperature protection, power on/off transient protection, subsonic filter, external mains fuse |
| Power supply | 100–240 VAC, 50/60 Hz |
| Cabinet | Vinyl-laminated MDF with high acoustic efficiency |
| Dimensions | 234 x 176 x 230 mm (H x W x D) |
| Weight | 3.8 kg unpacked |
The manufacturer reserves the right to change product specifications without notice.
1 balanced XLR, 1 balanced TRS and 1 unbalanced RCA. The input impedance is 20 kOhm on the balanced inputs and 10 kOhm on the unbalanced one.
Yes, the coaxial geometry keeps performance consistent both vertically and on its side, which makes placement easier in compact spaces.
With the EQ switches on the rear panel, controlled by the DSP, which compensate for placement near walls or in rooms with imperfect acoustics.
100–240 VAC, 50/60 Hz. The mains fuse is external and the monitor also has overtemperature protection.