The PIONEER DJ DM-50D-W are a pair of 2-way active studio monitors in white, designed for DJs and producers working at a desktop setup. Each monitor has a 5-inch woofer and a Class D amplifier. You choose DJ or Production mode with a switch. They also suit broadcast, podcast and interview content.
Class D amplifier and DSP. Each monitor has a new Class D amplifier with 96 kHz DSP sampling, which delivers pure, balanced bass. Together with the 5-inch glass fiber woofer it provides extra power when needed, without distortion even at high volume. The woofer and tweeter are aligned, so all frequencies are heard clearly. The amplifier delivers 25 W + 25 W.
DJ and Production modes. With the switch you move from DJ mode to Production mode, and the DSP settings adjust automatically for the best sound in each use. You do not have to choose between one set of monitors for DJing and another for making music: the same pair works for both, and you stay focused on the mix.
DECO design and grooved ducts. The convex DECO design, updated from the DM-40 model, carries crystal-clear highs in every direction, with a wide sweet spot and 3D stereo sound across the room. The grooves on the ducts reduce air friction, so the bass stays tight and punchy even with the monitors close to a wall. The curved front edges give maximum rigidity and minimum resonance, for clean audio at any volume.
Connections and front controls. The RCA, mini jack and TRS inputs let you connect DJ consoles, mixers, laptops or the audio interface you use for production. The headphone jack and the level knob are on the front panel: you do not need to reach the back of the monitors to adjust the volume or plug in headphones.
| Type | 2-way bass-reflex active monitors, bi-amplified |
|---|---|
| Woofer | 5" (127 mm), glass fiber cones |
| Tweeter | 3/4" (19 mm), soft dome |
| Power | 25 W + 25 W (L: 25 W / 4 Ohm, R: 25 W / 4 Ohm) |
| Impedance | 10 kOhm |
| Inputs | 1 TRS 6.3 mm, 1 RCA, 1 stereo mini jack 3.5 mm |
| DSP | 96 kHz sampling, DJ and Production modes |
| Cabinet material | MDF with vinyl laminate |
| Color | White |
| Power supply | AC 100-240 V, 50 Hz / 60 Hz |
| Power consumption | 25 W; 0.3 W or less in standby |
| Dimensions (W x H x D) | Lch 175 x 262 x 257 mm; Rch 175 x 262 x 247 mm |
| Weight | Lch 3.9 kg; Rch 3.5 kg |
The manufacturer reserves the right to change product specifications without notice.
One 6.3 mm TRS input, one RCA and one 3.5 mm stereo mini jack. You can connect DJ consoles, mixers, laptops or an audio interface.
With the dedicated switch. The DSP settings adjust automatically to deliver the best sound for the mode you choose.
Yes, there is a headphone jack on the front panel. The level knob is on the front too, so you do not need to reach the back.