The FLUID AUDIO FX80 V2 is an active 2-way coaxial studio monitor, sold as a single unit, designed for producers, musicians, content creators and immersive audio systems. It has an 8 inch woofer and a 1.2 inch silk tweeter on the same acoustic axis, with 110 W of bi-amplified Class D power. It works well in medium to large home studios and project studios.
Coaxial design. The tweeter is mounted in front of the woofer on a fixed support, on the same acoustic axis. The result is a point-source presentation with better phase coherence, a stable stereo image and a more uniform off-axis response than ported designs with the tweeter above the woofer. The coaxial geometry lets you use the monitor vertically or on its side.
DSP and placement controls. The onboard DSP handles the 2.4 kHz crossover and the shape of the response for a smoother transition between woofer and tweeter. The switches on the back compensate for proximity to walls or a less than ideal room. The front slot port supports low-frequency efficiency and lets you place the monitor closer to the wall. The front LED also serves as a reference for positioning the monitor at ear height.
Evolution of the FX series. Compared with the original FX platform, the V2 version has updated DSP tuning, a flatter overall response and clearer labeling on the rear panel. The woofer has a composite paper cone, a high-temperature voice coil and a damped rubber surround.
Mounting and immersive systems. The M6 mounting points on the back allow wall or ceiling installation. This way the FX80 V2 can serve as a side, rear or overhead channel in Dolby Atmos and other immersive monitoring systems. For smaller rooms there is the FX50v2, with the same coaxial philosophy in a smaller format. For more low-end extension you can pair it with the FC10S.
| Type | 2-way coaxial studio monitor with Class D amplifier |
|---|---|
| Woofer | 8 inch, composite paper cone, high-temperature voice coil, damped rubber surround |
| Tweeter | 1.2 inch, natural silk dome |
| Frequency response | 35 Hz – 22 kHz (±2 dB) |
| Crossover frequency | 2.4 kHz |
| Amplifier power | 110 W total: 60 W woofer, 50 W tweeter |
| Max SPL | 110 dB at 1 m |
| Signal-to-noise ratio | >90 dB, typical A-weighted |
| Inputs | 1 balanced XLR, 1 balanced TRS, 1 unbalanced RCA |
| Input impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Input sensitivity | 85 mV of pink noise produce 95 dBA SPL at 1 meter with volume at maximum |
| Polarity | A positive signal on the + input produces outward movement of the woofer cone |
| Protections | RF interference, output current limiting, overtemperature, power on/off transients, subsonic filter, external mains fuse |
| Indicator | Power LED on the front panel |
| Cabinet | Acoustically efficient MDF, vinyl covered |
| Dimensions | 340 x 254 x 295 mm (H x W x D) |
| Weight | 7.9 kg without packaging |
The manufacturer reserves the right to change product specifications without notice.