The FLUID AUDIO FC10S is an active studio subwoofer with a 10 inch woofer and a 200 W Class D amplifier. It is made for anyone who mixes and produces in medium to large rooms and wants to extend monitoring down to 20 Hz. The existing texts also list it for gaming and home theater. The bypass pedal is included.
Pedal bypass. The included pedal switches the subwoofer out without leaving your workstation, so you can compare the mix with and without the extended low end and check that it holds up on smaller systems. Used with the satellite connections, the FC10S applies an 80 Hz high-pass filter to the connected monitors.
Monitor integration. On the rear panel you adjust the low-pass filter from 50 Hz to 200 Hz, the phase from 0 to 180 degrees and the input gain to match the sub to the left and right monitors. The ground lift helps reduce ground hum in some installations. The front port makes placement more flexible.
Flat and Punch modes. Two built-in EQ settings: Flat for balanced extension and consistent monitoring, Punch for a more pronounced low-mid range, useful with dance music and material where impact matters. An amplifier standby function helps save energy.
| Quantity | Single powered subwoofer |
|---|---|
| Woofer | 10 inch, composite paper cone, high-temperature voice coil, damped rubber surround |
| Amplifier | Class D, 200 W continuous |
| Frequency response | 20 Hz – 200 Hz |
| Max SPL | 107 dB in Flat / 108 dB in Punch |
| Inputs | Balanced XLR, balanced/unbalanced 6.3 mm jack and RCA |
| Outputs | Balanced XLR and balanced/unbalanced 6.3 mm jack |
| Low-pass filter | Variable 50 Hz – 200 Hz |
| Phase | Variable 0 – 180 degrees |
| Satellite high-pass filter | 80 Hz with the pedal |
| EQ modes | Flat and Punch |
| Other rear controls | Input gain and ground lift |
| Bypass | Bypass pedal input |
| Cabinet | Vinyl-wrapped MDF |
| Dimensions | 387 x 317 x 394 mm (15.25 x 12.5 x 15.5 inches) |
| Weight | 12.8 kg (28.2 lb) |
The manufacturer reserves the right to change product specifications without notice.
Yes, the bypass pedal is included. It lets you switch the subwoofer out to compare the mix with and without extended bass.
Inputs: balanced XLR, balanced/unbalanced 6.3 mm jack and RCA. Outputs: balanced XLR and balanced/unbalanced 6.3 mm jack, to feed the left and right monitors.
Low-pass filter variable 50 Hz – 200 Hz, phase 0 – 180 degrees, input gain, ground lift and a Flat/Punch selector.
20 Hz to 200 Hz. It extends the low end of compact studio monitors, which often don't reach as low.